Manifolds

  • It is designed to visually monitor the progress of the cooling water’s flow
  • To prevent cooling pipe from clogging and to make sure the cooling water flow out completely after cooling phase
  • It is closed circuit, so it can prevent contaminants
  • There will be no hot water spilled after die is cooled, hence safety operation can be perform

Pressure monitor

  • Ref: RP-P3-M12 – 1 piece – Pressure Switch, 3 bar, G1/4’’ M12 connector
  • Ref: RP-2130150 – 1 piece – LED cable for Pressure Switch M12
  • Ref: RP-CAPT-PR – 1 piece – Pressure sensor, 0-100 bars, G1/4’’ M12 connector
  • Ref: RP-CAPT-PR2 – 1 piece – Pressure sensor with display, 1-10 bars, G1/4’’ M12 connector
  • Ref: RP-CAPT-CABLE – 1 piece – Cable with femelle connector for Pressure Sensor M12
jet cooling manifold
Manufacturer of cooling solution for foundry and die casting Jet Cooler
jet cooling manifolds pressure monitors

Manifold pressure switch

Ref: RP8-SC-1.1-R0 – 1 piece
8 entries, Core Pin Breakage, Visual Control

Ref: RP8-SC-1.0-P41 – 1 piece
8 entries, Core Pin Breakage, No Visual Control,
with Ø4 couplers

Ref: RP8-SC-1.1-P61S – 1 piece
8 entries, Core Pin Breakage, Visual Control,
with Ø6 couplers

jet cooling manifolds pressure monitors

Manifold pressure sensor

Ref: RP8-SC-2.1-R0 – 1 piece
8 entries, Core Pin Breakage, Visual Control

Ref: RP8-SC-2.0-P41 – 1 piece
8 entries, Core Pin Breakage, No Visual Control,
with Ø4 couplers

Ref: RP8-SC-2.1-P61S – 1 piece
8 entries, Core Pin Breakage, Visual Control,
with Ø6 couplers

jet cooling manifolds pressure monitors

Manifold pressure switch with visual display

Ref: RP8-SC-3.1-R0 – 1 piece
8 entries, Core Pin Breakage, Visual Control

Ref: RP8-SC-3.0-P41 – 1 piece
8 entries, Core Pin Breakage, No Visual Control,
with Ø4 couplers

Ref: RP8-SC-3.1-P61S – 1 piece
8 entries, Core Pin Breakage, Visual Control,
with Ø6 couplers